[Ron Fox]

Originally Posted by Mkelcy

455+ CI (with mods) - figure $6K - $8K or so for a good reliable build (with carb, not EFI) at the power levels you're talking about
4-Link set up (preferable DSE but that is another thread) - Figure $6.5K plus labor
Mini Tubs - Probably $2K (including third party labor)
335 tires & Wheels - Anywhere from $3K to $5K
Like to have the DSE sub - Another $7K or so
Upgrade the interior somewhat-seats, etc. - Like Recaros? Figure another $2.5K

So I make it about $29K before body work, paint, powder coating, interior, sound and heat insulation, gauges, HVAC, radio, electrical, engine accessories, headers and exhaust, clutch, fuel system, brakes, engine cooling, transmission, subframe connectors, and all of the other small bits (weather stripping, trim, emblems, etc.).

Your $50K budget is toast already.

To give you some idea, I'm building a '68 Camaro with aftermarket subframe and rear suspension, nice (but not custom) interior, really good seats, BUDGET paint, budget wheels, a GMPP 376/480 engine and so on, and I'll have about $80K - $90K in the car, not including the cost of the car. I've done all the work to the car except media blasting, rust repair and paint and body, so there's very little labor in that number. I have all of the major components sitting here already and I'm in the process of doing final assembly, yet I still find myself ordering $500 worth of stuff from here and $500 worth of stuff from there.

A counter example. I have my "driver" '68 Camaro with stock subframe, stock control arms, Guldstrand mod, SBC, T56, leaf springs, 10 bolt rear and C5 Corvette wheels on adapters. I track the car, take it on multi-thousand mile summer trips, play in the local mountains, etc. It would cost less than a third of what the '68 I'm building will cost to duplicate the "driver" but it's still a fun car that gets lots of comments.

This is a very expensive hobby, and can get totally out of control if you're not careful. So I urge you, as everyone else already has, to sit down and figure out what you want to do, and what it will cost; then double it and that'll be a decent estimate of what it will cost. When that number stuns you, start paring your project and figuring out what's really important and what's not. You may find that a modest build will do everything you want, including being affordable and a project you can actually complete.

I understand it can be very expensive and is very expensive to build a car. I have researched the prices on the item's I would like to have and they are not cheap. I know everything adds up even the small parts. A while back my builder asked me what I wanted out of my car and what parts I had in mind (engine, rear end, suspension, etc.) He said Ron you know you are talking about a $75 to $80K car. My answer above was $50 PLUS depending on which way I go with certain parts such as an after market sub or use of my stock sub, a somewhat stock/modified 455 or a heavy modified motor, high end wheels or cool budget wheels, etc.

Is it possible to have a plan A with all the parts and upgrades I want and then waver with a plan B with only the parts needed to get me up and running? Or do I need to stick with one or the other? I can build the car I want but it will take me a few extra years to complete it.

Thanks.