[almcbri]

I believe I am heading in the right direction but need some help clarifying what parts I need and where to find them! I need some input from the guys who have done the swap. My motor is a 98 LS1 Z28.

#1-Where do I find a fuel line (the one running into the fuel rail, I see some motors have braided lines, or rubber lines) I saw S&P has them, but they are high in price. (part #, company, any info. on where to find one)

#2-What did you do to make your powersteering lines work with the stock power steering pump? I have the stock lines, but wasn't sure if they are the correct length, and I figured I would have to have different fittings to run them into my power steering box.

#3-Do I need a power steering cooler? I see that some of the LS1's had this on them, but is it neccessary for me to have one on my car?

#4-Does the power steering pulley push on? No bolt correct? My exploded view shows no bolt at the end, so I assume it is a push on style????





I am planning on doing a write up of my install once I am finished. I want to take a few more pictures and try to cover even the smallest of details w/ parts #'s ect.