The Twist Machine bezels can now be installed on the gauges. It is a very simple, reversible operation.
The bezels are held in place by small silicone dots which are supplied with the bezels. Simply place a few dots around each ring and press the bezels into position. If you ever want them off you can just pull them back off with no damage to the bezel or gauge.
Once the bezels are installed it's time to sit back and enjoy your new dash panel. One hand on the wheel, making engine noises, and banging through the gears with the shifter is optional!
This list is all of the current websites for the companies whose products were part of the dash build for Ty's car.
http://www.anvilauto.com/
http://www.americanautowire.com/
http://www.autometer.com/
http://www.fbodywarehouse.com/fbw/home.php
http://www.twistmachine.com/shopping/
http://www.vintageair.com/
http://www.restoreamusclecar.com/index.sp
http://www.holley.com/index.asp?division=NOS
http://www.pypesexhaust.com/
Things needed other than basic hand tools.
pop rivet gun
spring clamps
drill and bits
hand held hacksaw blade holder
grease pencil
markers
files
vice
ruler
compass
caliper
dremel and bits
cut off tool
hole saws
drill press
80 grit sandpaper
posterboard
body shop masking tape
clamps to hold work
spring clamps