This is how we got really good welds while keeping the cage out as far away from the occupants as possible.
In this shot you will see the completed cage being jacked up and tack welded at the right height. The two sections of the dash that were removed for the front bar will be TIG welded back into place, with the appropriate hole, once the cage is finished.
This is a shot of one of the floor holes from underneath. You can see the bottom of the bar hanging at the proper height.
This is another foot pad box once it has been properly "boxed".
This is a picture of the front bar hanging.
The is the main hoop where it connects to the front suspension crossmember, at the next stage.
This is a down bar about to get the final welding.
This is the final product.
This is the rear diagonal weld.
This is a busy intersection.
This is where the rear down bar is secured at the rear suspension crossmember. The rear diagonal comes into meet here as well.
This picture is a little dark, but worth a look anyway.
Mark,
chezer