Quote:
Originally Posted by Mr.VENGEANCE
and yea im not trying to get a "pretty" accy drive.. so the GMPP one is 500 bucks?..
im just looking for the one that will do the job.
and im not going to run Heat or AC.. so that wont be a problem.
the thing is that the engine i got was a pull out so some major parts are missing..
the water pump, the manifold and TB, coils, etc... so im trying to get as much as i can.
i just want to be very cheap in these choices.. coz that's what it calls for at the moment..
|
Yea, go with the GMPP pulleys.. you coud get cheaper digging through a junk yard, but it's a hassle. should be near $500 for a No AC version.
For an intake you will either need an LS7 unit or you'll need the FAST unit. If an LS3 intake will work (I think it will) then I will have one for sale in the next month (with injectors and rails).
The TB can be sourced anywhere, you just need to decide if you want cable or Throttle By Wire.
I would price out Speartech since they do good work, but also check what the GMPP kit costs and comes with. You'll get better service from Speartech.
Since you are missing coils you can find some used LS2/LS3 coils..
I should also have an LS3 water pump (new) for sale soon since we are converting one to a Vintage Air Front Runner and it has it's own pump. In any event you should be able to find a pump just about anywhere.
Do you have a picture of what you have?