Jon-thanks for the "assist". I used to be able to embed pics but something changed over at Photobucket and I don't have the hang of it yet.
CRCRFT78-the beams are 6"x10". I set the width to match the track width of the car. The stringers are 3"x3"x.125 wall tubing with some angle welded to the ends for bolting to the beams. The legs are the same tubing with 6"x6"x3/8" plate on either end. The bottom end (foot) of each leg has a nut welded to it and a leveling bolt running through it. I also used the tubing to make 5 or 6 movable platforms that are at the same height as the working surface of the table. That way I can position them wherever I need a "false ground level" to work or measure from. Tough to descibe,I'll spend some time with the picture thing again.
Thanks for the interest,guys-
Peter
|