Quote:
Originally Posted by tobenk
Chris how u comin on the car? It looks awesome so far. Thats alot to do for the first time but u look like u doin well. I have my truck tore down rite now to goin to powdercoat frame then start puttin back together i hope. 
Toben |
It's coming, but slowly. I've managed to get the subframe under the car and aligned to the best of my ability so that I could start welding in the DSE sub frame connectors. I've pulled about 6 million dimensions on the car and subframe. Some x dimensions are within a 1/16th and other dimensions like wheel base dimensions are about 3/8" off from side to side. I don't have the rear suspension under the car yet, so I'm doing my best in determining the 12:00 position on the quarter lip and then dropping a plumbob to the ground to find the center of the wheel opening to measure the wheel base. Who knows, I could be slightly off with my guessing. I did get the driver side floor cut out and the connector is fitted and ready to be welded. BUT before I weld it in, I think I'll hang the front sheetmetal one more time and measure some more.
I find myself trying to build a 68 Camaro with 2010 specs, and it just ain't happening to work out the best for me. I'll be posting pictures soon hopefully. The holidays were supposed to be time for me to work on the car, but that it didn't happen! Stay tuned.