Quote:
Originally Posted by Vegas69
I like how it covers up the top of the radiator support but allows access to the front of the support for remote mounted resorvoirs. Hmmmm, no carbon fiber on my car but that may change soon.  |
Don't forget, kids, you can always paint carbon fiber any color you want.
If you want to leave a little carbon fiber exposed you can mask it off and paint the rest for a custom graphic treatment. All you need to do is block out the part with 320 sandpaper, then finish with 400-600. Just enough to give the paint a little "tooth", but not too much to show sand scrathes when you're done. Clearcoating the whole thing when you are done will keep it looking good and is highly recomended for partially exposed carbon areas. All of Anvil carbon fiber parts aleady have a clear coat on them with UV protection, but if you sand through it, you will want to use a clear with UV inhibitors in it.