Quote:
Originally Posted by 68protouring454
so elite, tell us. if you need a deck lid and buy a goodmark one and it has almost 1/2 gaps on each side, how do you make it fit correct? or how about a goodmark hood which commonly has good side gaps but almost always tapered gap on the front against the header panel, one side of middle is good other is wide, what is out of shape then? i guess no aftermarket panel company would make something that out of tolerance? please let us all in on how to adjust quarter panels to make the trunk lid fit.
|
Jake you haven't heard anytime a gap is to wide you put the car on the frame machine and tighten her up....you know just pull the rear rails together tap it with a a body hammer, pick it with a PDR tool do some adjusting and thats that....
We weld edges, split panels, anything we have to do to make gaps perfect as long as the panel isnt warped and its metal finished there is no way to tell one way from the other.....
there is NO car that camed from the factory I have ever seen with 3/16 gaps as most of the new OE's have and im gonna say the car with the metal finshed welded gaps blows the car with the metal massaged (non-butchered) technique away panel fit wise...