View Single Post
  #2  
Old 01-26-2010, 08:18 PM
ProdigyCustoms ProdigyCustoms is offline
Senior Member
 
Join Date: Mar 2005
Posts: 3,859
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Power brakes I assume? 140-8556 is correct for power brakes

You want to tee the front lines and bypass the distribution block. you can use the factory front to rear line and splice our prop valve into it.

need to check under you drivers seat on the side of the subframe for a residual valve, if you have one, it needs to go bye bye.
__________________
Frank Serafine
Reply With Quote