i am still in the process of collecting parts, my combo is on the far side of streetable, the static comp ratio on mine will be around 12.5-12.8, with a fair amount of cam overlap. the rest of the combo will be a standard small journal sbc block, splayed caps, roller cam bearings and offset lifters, bryant superlite crank, 339 cubic inches. RCR sb2.2 heads/intake cnc ported, 5 stage dry sump, and all the other goodies.
as soon as the parts are collected it will be off to the machine shop, and onto the dyno. the target is 650-700hp, and it should be able to turn 8500-9000 rpm for atleast 86 miles at a time(silver state challenge)
the original plan called for a manual trans, but now things have evolved to a 4L80E, and steve-o will be taking care of up/down shifting.
the combo will have lil torque compared to the forced inducted monsters most guys are putting together, but its also goin into a 2100# "shop truck".
|