Quote:
Originally Posted by J-440
Evening all. I am about to start fabbing my brake lines and the kit that I received has no brake distr. block. I do have a boatload of T and L fittings as well as an adjustable proportioning valve. Since I have the prop. valve, would I even need to use a brake distrib. block? Thanks again.
|
I have a Wilwood 4 wheel disk setup with the Wilwood master cylinder. I ran a line from the front outlet of the master (closest to the firewall) into a T fitting and split left and right front brakes, I then plugged the rear outlet from the master into my adjustable prop valve, then through a #2 residual valve and ran it to the back. I'll let you know how that works out for me.