Take kevins advice and stick with a recirc. ball box. Putting a R&P in anything takes a lot of design work and just any rack will not work. The inner tie rod points need to be in the correct relationship to the upper and lower control arm pivots not only fore & aft but side to side AND up and down. Not taking these points into consideration will give you an ill handling car with outrageous bump steer, ackerman and turning radius issues. Leave the racks for the racers with revised geometry and go with an updated box...
Just my 2 cents
Mark
__________________
"Bad Ast" Astro Van Pro-Touring Project.... Heat, beat, file to fit, paint to match...
|