You can mount the clamp on the space between the welded shock mount & the end of the brace.. rotate the clamp so that you can plumb on top of the brace instead of the center of the brace like the pic attached.. or fabricate an L shaped bracket that you can drill to the hollow end of the brace..
I hope this pic helps!
Quote:
Originally Posted by scherp69
Just checked the Moser website...it is 3" O.D. The back brace is hollow. Where on the housing would the clamp fit? with mine, there is a bracket on the top for the short arms and on the bottom (you can see in the first pic) I welded on the bracket for the rear sway bar. I would be interested to see what you have in mind though.
|