Some weather pak terminals can be removed with a safety pin, others need a tube with a spring and some the 2 prong tangs.
I just got done playing with my hego O2 sensor plug and the tool like in the pic didn't work but the safety pin did. I had to bend the tang back to its original place to get it to stay back in but it work good.
Getting the right tool really helps and really getting some light on them helps in seeing the tangs. A small led light is what I used to see them.
Good luck and remember that you can buy new ones and shorten up most of the wires in a harness to begin with. You can also change to a different style connector if you wish. Most connector are a certain shape to conform to factory harnesses.
Last edited by Jim Nilsen; 02-20-2010 at 08:54 AM.
|