Step 1 of the wideband install is finally done. The wires are thru the firewall and the main plug is all together. It wasn't too bad to do, the pins came right out and the hole only had to be 1/2" so it is nice and clean looking.
Step2 is to take apart the center gauge panel and hook up all the wires inside.
I am hoping the voltage output from the wideband will work with my USM module without any adapter to my racepak. It would really be nice to be able to read a/f ratios with it.I will be talking to Donny at racepak on monday or tuesday.
So far so good and if it all goes good it will be working by wed or thurs.
