brakes
Stock brake lines will be fine for your application. Obviously you will need some type of adapter to go from metric to standard on the C5 caliper and probably the rears...easy to do. You will also need an adjustable proportioning valve for the rears to get the bias correct.
If I remember correctly you are running a fuel injection unit so you will need a return line. You can run a 69 SS fuel line for a 350 motor as from the factory it had a return line...then just cut the feed line where you want to run the pump.
Trying to make it easy from a bolt on standpoint. You can bend your own lines and run them where you want but it is a pain in the ass.
|