Quote:
Originally Posted by 67ragtp
Bill,
Go to the home page and scroll down to the first red camaro, Scotts car, go to the engine section towards the bottom of the page jpeg 0105 it shows his peterson tank and how far it sticks down below the frame rail. He acually welded a tab for the lower clamp. I believe this is unavoidable and these guys aren't having any problems. Im getting ready to do the same for my 69 but waiting for the car to get back from paint. I was hoping you would get more responses on this thread, since there's not to many places to mount that tank. Also check out stuarts ride on the DSE website, they did a nice job of instaling his tank(although I dont believe its a peterson think its a modified gm). There's also some pics of Mark Stielows first ls7 install on the home page, I believe its a peterson as well. Hope this helps.
Rich
|
Thanks Rich,
I've scoured this site and many others looking at pics of oil tanks, but not many show how low they hang. Have seen Scott's photo you're talking about and it appears to be about the same distance below the subframe rail. What has me baffled, no pun intended, is this pic from the good people at DSE. Note the bracket to hold the tank. It appears to set the bottom of the tank close to level of the subframe. I have been speaking with them regarding this, and they have graciously offered to measure the height of this tank (also peterson), but it is currently at the upholstry shop. Peterson has offered to exchange the tank if necessary. I just want to get it right before it's too late.
Bill