Quote:
|
Originally Posted by Andrew McBride
Well I have been considering modifying a stock new tank to work with a fuel injection style engine. I am running a fuel injected TBI 5.7L 350. 325-350HP
Can I take a stock tank and replace it with this style of fuel pump and be ready to go?
http://www.tanksinc.com/index.cfm/pa...prod/prd84.htm
Will I need anything else? Any type of special venting added to the tank?
Thanks for any feedback, I am having a tough time figuring out what exactly I need to do. |
TBI as in Throttle BODY Injection, or Tuned Port Injection? The reason I ask is the TBI only requires about 9 PSI to run even if you are pushing 350 hp. The TPI will require 30-45 PSI.
If you are going TBI I would think this pump is overkill because you will have to put a major regulator on it that will cause excessive heat and build up of pressure against the pump.
If you are TBI you would save a lot of time and trouble by getting a simple in-line pump and mount it on the rear frame rail.