Thanks Rich....As much money as I've spent with DSE I should just call and adapt their brackets if they would sell them to me.
Naah....here's what I've come up with.
Outside of frame: 1/4 plate with three 1/2 holes and a 1/2 tab for my heim joint.
Inside frame: 1/8 plate with three 3/8 holes
Shoulder bolt: Button head, 1/2 shank, 3/8 threads, and 2 inches in length.(Frame is 1.720) plus .250 plate gives me 1.970. So I'll have about .030 preload on frame. What do you guys think?
