Then I got all my Ridetech compressor stuff. When I mocked everything up I had some concerns with the speaker hole in the rear deck. I do plan on having a stereo....but will probably not listen to it much
. I wanted to sink the stuff as deep into the trunk as possible to retain as much trunk as I could. But if I did, the tank sat right under the speaker hole and left about 2 inches from deck to tank...not enough for a speaker. Ridetech has a more narrow and taller 7 gallon tank, that would fit between the speaker holes, but was just a tad too tall to fit.
So ultimately I ended up mounting the stuff towards the back of the car more than I had hoped for, so I did lose more trunk than I would have liked, but its the best compromise I could come up with. I should be able to get a speaker in there. I had thought about flipping it all around, but that would put all the connections on the back and make it real hard to get to if/when I need to.
I wanted to take the time to thank Tony Bicknell at Ridetech.... I've been bugging the crap out of him with questions and trying to tweak my set-up to shorten the harness's etc etc....he's been fantastic. All my interactions with Ridetech have been great..... thank you..