View Single Post
  #47  
Old 03-10-2010, 05:55 PM
ccracin's Avatar
ccracin ccracin is offline
Senior Member
 
Join Date: Sep 2006
Location: Rostraver, PA
Posts: 2,077
Thanks: 0
Thanked 4 Times in 4 Posts
Default

Quote:
Originally Posted by RECOVERY ROOM View Post
I work on a time and material basis,My shop rate is 55.00 hour per person.We use above average materials because they work and look good.Most of are complete interiors can run between 13k to 20k,And yes it depends on the materials and the amount of work that an owner wants us to do.If we install and buy the stereo this adds to the price,Dynamat adds to the price,Making a dash will add alot to the price.The orange Chevelle needed a Dash,Seats,Custom made back seat,billet parts,Stereo,and a cloth top.If you look at it this way, If we were only 15% to 20% of the total build cost.Not a bad return on your money for the amount of area or work done to the car.Every once in awhile it gets expensive depending on the amount of work and parts we have to get.I have never had one go to 30k,Even on the Rad Rides cars we have worked on.I have done cars that were around 25k several times.Bottom line is that the more you want the more time it takes to make it work and fit the car.

Great information Tracy. The other thing to put it in perspective is just open a Year One Catalog. Start with an empty shell 69 Camaro and price a Repop interior from that catalog. I think most folks would be surprised. And that is nothing custom, just order and install.
__________________
Chad
Instagram - @cctek
https://https://www.facebook.com/CCTek

68 Chevy Pickup Project
Build Thread: https://lateral-g.net/forums/showthread.php4?t=7505

THANKS TO: A&M Machine and Fabrication, CCTek (http://www.candctek.com), Hermance Design(www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Wegner Automotive Research, Clayton Machine Works
Reply With Quote