If you have the tilt with the key in the column and it has play, the most likely source is the four bolts that hold the tilt mechanism to the column tube. On later models they are Torx headed, but on the earlier columns I think they are Phillips.
Get a manual, take your time, and be patient and they aren't that difficult to get to. Remove each, one at a time, apply Loctite, then reinstall and tighten it. Once all four are done, replace the upper column parts you removed and all is good as new!
Shiny Side Up!
Bill
__________________
Never met a man with real talent who felt the need to deride the efforts of other.
|