We just bought a B-Body car for development purposes, and are basically begining the development of a three link kit derived largely from our F body. I expect to have a prototype in a couple of weeks, we committed to a customer that is doing a buildup for one of the larger supply houses, his car will be debuted in the March timeframe. Our car is a 1968 Satellite, and frankly is our first Mopar. I am super excited about the car, and from a cursory glance, it looks like there is TEMENDOUS room for improvement, both in the rear suspension, but more so in the front. We are working with the same customer on his next project, to do a full on front setup too. Anyway, I hope to have a rear kit out by the end of January, and the front stuff will likely be several months after that due to the relative complexity. Our website is still under construction, but if you are interested, you can shoot me a PM and I can send some photos over to you of our current kits, it will give you a good idea of what the Mopar setup will be like.
It looks to me that a 315 tire will potentially fit in the rear with a bit of modification to the inner fenderwell, there is a pretty significant space between the quarter and the inner, so our plan is to move the fenderwell outwards. I am hoping to get a 315 in the car without tubbing it. If I can't, well, then we'll be tubbing the car, and probably going bigger. It also looks like there is enough room in the front for a 275 as you stated, so it should look really mean. It is not so obvious about fitting a 335 back there, not without a tub deal, but it won't need much relative to other muscle cars in order to make it happen.
I was blown away to learn that the B-body cars are unibody. I already have a concept for a subframe connector, it should be simple to make out of 2.5" square tubing.
Cool cars, I am super excited to learn more about them and to work with other folks who love the cars. There is so little out there, I think we can help out a ton.
Mark
|