View Single Post
  #7  
Old 03-20-2010, 10:24 PM
The WidowMaker's Avatar
The WidowMaker The WidowMaker is offline
Senior Member
 
Join Date: Jan 2008
Location: Huntington Beach, Ca
Posts: 773
Thanks: 0
Thanked 0 Times in 0 Posts
Default

not sure what you have for shocks and springs, but you said you could wiggle the ds spring, but not the ps. if the ps has more height to it, it would of course cause that side to sit higher.

i just kind of went through the same thing. while measuring for the wheels, i had the car up off the ground and supported on jackstands. the rear quarters were off over 1/2". it ended up being that i used a mixed set of jackstands at the front, and although they are the same brand, one was 1/2" off. so, all im saying is it could be either at the front or rear that causing both to be off.
__________________
"The WidowMaker"
70 Chevelle Pro Touring - Garage Built, Backyard Painted
Custom 4 Link & Watts, Rushforth Wheels, Ats Spindles, McLeod RXT Twin Clutch, T56 Magnum, C6Z Calipers & Ring Bros Hinges
Special Thanks To: Rushforth Wheels ; Kore3 ; SC&C
Build Thread : https://lateral-g.net/forums/show...ght=widowmaker
Reply With Quote