Quote:
Originally Posted by PASD U
Curious as to what it takes to get the gauges to work right. Wanting to do something similar but with a different truck.
|
the caddy guages are simular to most late model guages, you will need a schematic of the guages to figure out what wires are what. then pick up the signal from the computer terminal. (thats avail from street & perf website) the tricky part is getting the message centre working in the cluster. i used the data wires from my dlc connector. then each time you ground the stearing wheel controll pin it advances to the next message. it takes a little research but wasnt very expensive. thanks bill