Quote:
Originally Posted by Mover
Okay I’ve got a Wilwood question. I would like to know the best way to hookup my rear brakes. What I’ve got is a 1/4” line coming from back and I’m trying to hook it into the Wilwood proportioning valve that’s a 3/16” line. Any input would be helpful.
|
I would use a 1/4" female SAE flare to 3/16" NPT male bushing. The input to the valve is NPT right? I forget. If the input to the valve is an SAE flare then look for a 1/4" SAE (female) to 3/16" SAE (male) flare fitting. The 1/4" line is pretty large so it may take some looking. For some reason I remember the valve being a NPT female, and not 3/16". But Im not sure, its been awhile.. JR