Good Evening All,
Sorry this post is so late.
My goal is to post every Mon & Thursday till you see the finished product.
Lets start from the beginning
Dave @ Comp Fabrication built the entire dash out of sheetmetal.
As you can see from the above picture we needed the extra space.
We lost a bunch of real estate when the firewall was moved back.
The dash mimics the Factory dash almost exactly.
Yet to install was the glove box - Not to worry that is where the interior guy's do there magic.
Making room for the Autometer gauges they removed from the Dash Surround.
New Home - right under the Vintage Air controls.
Laying the material.
Stepping up the details on the dash with some trim.
Two more Autometer gauges in place.
see ya next week - have a great weekend.