Just pulled the schematic between the Escalade and Vette harness & Parts.
Both the Vette and Caddy use the same wire harness terminal plug part number for the 2007 6.2 and the LS Vette -
I have attached the schematic for the Caddy and Vette.
They both use the same plugs, but a couple of the wire colors and feference terminals are different.
Based on this, I would say if you can get the Caddy t/b to bolt on the intake and clear then there is no reason why it won't all go.
I can't confirm for sure at this moment if the Vette t/b will talk to the Caddy pedal and ECM as you can see they are wired different.
|