Quote:
Originally Posted by 69MSA
Mike, we had to make little U shaped brackets to attach the "christmas tree clips" to. This way the bracket sat flush with the inside of the door. Depending on where we located the brackets, they needed to be between 1/2" and 1" tall.
Does this make sense? I'd provide pictures but I think I lost them all due to a corrupted card.
Matt
|
Thanks Matt,
From what you are saying is that you made "L" brackets. Then bolted/screwed them to the fiberglass door panel. Then used clips on the "L" bracket that inserted into holes on the door. That would work but the screw heads would need to be flush with the fiberglass so you dont see the indention from the screw head in the leather material.