-New Diff Mount
The old diff coming out weighted 92 lbs. You can see the new rear mount on the diff. The old system tried to use the OE corvette mounts and added a few, that failed honorably. So this is what I've come up with to fix it. The rear plate is the big difference but I've moved the front upper mounts too and upgraded to 5/8' hardware. The rear we drilled out the threads since all but 1 of the rear plate holes go through the aluminum and captured the bolt on the other side to ensure a much better hold to the case.
-Whats next
I'm going to get the turbos coated and mod the exhaust a little. Some of the wrap was getting ripped up on bottom with all the gravel in the area.
Gas tank mod, it had a little leak, lets just say I got a little full of my self with the tabs and slots and made an awesomely complicated section that I couldn't weld all to well and now it leaks, a lot.
Wiring, I'm re arranging some of the ISIS boxes for ease of access and changing some of the wiring to more secured locations.
Brake cooling ducts, with the inner coolers out of the way it'll be easy now the back is getting a neat trick too.
Finish out the roll cage
Later
-Russell