Why not mill the heads more? Did you have them angled milled or flat milled?
You can deck the block but you need to be careful of the piston's location in the bore. I can't remember on the trucks but on the cars, the piston is already above the deck stock. So decking the block is not ideal compared to working the heads.
__________________
Trey
Current rides: 2000 BMW 540i/6 and 86 C10.
Former ride: 1979 Trans Am WS6: LT1/T56, Kore 3 C5/6 brakes, BMW 18in rims
|