to directly answer the question.....yes the panels will need some fine adjustments once the frame pull is done.
i would probably tell ya to take the car to a GOOD collision shop as it sits, have them set up and measure the car on the rack(usually set-up/measure time is a flat rate) have the shop check it out and give you what they feel is the best way to fix it.... with either a frame pull or shims.
im assuming the front horns are whats off... throwing the core support off.... then everything else that bolts to it. this might be a simple shim it and leave it, or it might require a pull, its a judgment call depending on how far "off" it is.
|