Thread: Mecum Auction
View Single Post
  #1  
Old 04-20-2010, 08:18 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,471
Thanks: 7,692
Thanked 2,350 Times in 1,100 Posts
Default

Quote:
Originally Posted by lil427z View Post
charley , what kind of power did the car make.
rick k
91 octane 15 psi.........only got to pull to 4800 rpm at that boost level because it shut the Dynapack dyno down (too much torque with 3.00 gears) Should be in the 850-900 rwhp range with a full pull, more with race gas.



Did do a pull after at 9 psi and it was just over 620 rwhp at 6300 rpms or so if I remember correctly. Turn it down to 6 psi and it's absolutely pedestrian, anyone could drive it. Cool thing about turbos, you literally dial in the power from inside the car.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

Last edited by camcojb; 04-20-2010 at 08:22 PM.
Reply With Quote