[SS350Sport]

Here are some pictures of the rear sway I snagged @ Pick N Pull last weekend. It's from a 99 Tahoe. I Also tried to get the mounts from the rearend by using an 18V sawsall to slice the shock/sway bar mounts from the rear end housing. The axles were already out. After bending three blades I gave up. I will just fab up some mounts in the stock location on the rear end. It looks like a direct bolt in, no need to shorten the link rods. I also have to correct the pinion angle. The previous owner welded the leafspring pads in the wrong angle. I am going to do most of the fab work using the old frame, before I start transferring parts to the new frame.