Quote:
Originally Posted by Steve1968LS2
email me and I will check a "good guy" price over at IEDL.. Of couse I would need EXACT dimensions and what U-joints you are running.
[email protected] |
Email sent....
FYI though....
The measurement form the metal lip of the rear seal on the trans to the face of the U bolt mount on the diff is 53 7/8” with the suspension loaded under vehicle weight at rest.
I used a conversion U-joint on this which allowed the use of the stock 69 shaft with the BRP mounts. The new shaft can have standard Ford joint which I think will be better as well. The diff yoke is 1 1/8” diameter and 3 5/8” from cap to cap (on the diff side). I think that is a 1350...but I can't remember for sure.