One other angle I had questions on...the lower shock mount bracket that attaches to the rearend
The upper shock mount brackett is not at 90 to the ground...its tilted forward at the top by about 10 degrees....so if I do the lower bracket at 90 degress, these wont be on the same plane....should I basically tilt the lower bracket so it mimics the upper bracekt slope?
If the top mount is 80 degress and the lower is 90, isnt that gonna put alot of stress on the shock during its travel?
Its on Air Ride....so I'm doing all this at ride height, but obviously it will change alittle as I raise and lower the car.
|