Been a busy couple of weeks on the car. Complete BMR suspension is installed, 3" Stainless exhaust has been fabricated and installed, Ricks tank installed, and fuel plumbing has began. Made the decision to run the 19/20 combo from Forgeline that I had for the Challenger project. The 17's were causing way to many issues in the rear, back spacing was setup for the inboard leaf spring setup that previous owner had fabricated. So they were interfering with the BMR lower arms. I'll have to send the fronts off to be rehooped! Even though with the 285 I can almost turn lock to lock in the front. Might just change out the rear hoop and go to a 255 front as back spacing is perfect right now
