View Single Post
  #20  
Old 05-15-2010, 05:56 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,282
Thanks: 6,896
Thanked 2,118 Times in 973 Posts
Default

Quote:
Originally Posted by clay69camaro View Post
I just don't understand how it worked on the mule, but it can't work for me.

As of right now buying a new sub-frame is 100% not an option.

I'm moving over the summer and need the car to be able to roll. Maybe after I get settled in I'll be able to get it sold, break even since I bought it used too.

Thank you though, probably will give you a call and figure out what I need for my build before I buy next time.

Mark one up for lack of experience.
It can be made to work, just depends on how much work and money you want to spend to make it work. I sent Mark an e-mail, I'll let you know what he says......

I do know I rode in the Mule on a road course with Mark driving and the car was very stable and very fast. I remember Mark saying he was happy with how it worked on the track. I'm not saying it's the best way to go subframe-wise, but I think you can make it work plenty well to have fun with since you already own it and cannot afford to buy something else.

Attached Images
 
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

Last edited by camcojb; 05-15-2010 at 06:13 PM.
Reply With Quote