[The WidowMaker]

The motor was originally going to be mounted with the frame stands in the stock location. But after looking at all the room behind the heads, it got moved back. It doesn’t really help with weight distribution very much (moving a battery is way more advantageous), but it looks a little better. I then ran into the issue with both the header to ground clearance, and the tie rod to autokraft pan. In order to solve both of these problems, I actually lifted the motor within the chassis. Automatically this will make you think that the cog was raised, but by raising the motor 1”, I was able to lower the front of the car 1 more inch. This left the cam height to ground the same, but lowered everything else. It also cleared up my tie rod issue.