[6spdcamaro]

To the guys at Prodigy or Driverz, or any of the other wheel gurus. The car is a 68 Camaro. It was mini-tubbed and it has a quadra-link in it. DSE recommends and 18x11 with a 315. But since both the 315s are hard to find, and an 18x11 is extremely expensive I am trying to find another option. A 295 just isn't wide enough. It only has an 11 1/2" section width. So my other alternative is a 335. I would like to know if I have room for an 18x12 with 335/30/18's with no rubbing issues. The measurements are in the wheel well at 10, 12, and 2 o'clock respectively. Thanks in advance.



The pictures are a little deceiving. The 10 and 2 o'clock positions are about 14 1/4". the center is about 14 3/4". I hope this will solve my problem...