Quote:
Originally Posted by Pantera EFI
My ECU-882C-x needs only to "see" one pulse after the last cylinder/before the first.
Thus the 1/2 moon target works.
Hall sensors "see" high and low.
I have used the 4 Post target wheel AFTER modification to produce that 1/2 Moon wave form.
One method, in your case, would be to ADD/REMOVE metal on the face of your crankshaft sprocket.
Lance
|
I htought of that... mod the 4x by addind material between the two large moons and removing the two smaller bumps.
But, dont you need to make sure it stays balanced or is that not an issue since its small?
__________________
"A ship in port is safe, but that's not what ships are built for."
See Bad Penny run the cones:
https://www.youtube.com/watch?v=8GUPPIX-92U
1971 Chevelle Wagon - Roadster Shop Chassis ProCharged Shafiroff LS and lots of yada yada
1968 Camaro - Project Track Rat - 440 RHS LS