[Tuske427]

I didn't get much done this weekend, I had company in from out of town. I did have a few hours today after work so I removed the passenger door skin and started to make patch panels for the door structure itself. Then I will re skin the door.

I have 2 of the 3 panels pretty much made, the third is only rough cut out. I used the leftover original door skin for the patch material. A new door skin awaits assembly. I also have a pic of some of the pass side rocker panel area that I had to cut out and will need to create a patch.

While the door is apart I'll also spray some Eastwood rust encapsulator to stop any remaining rust I haven't been able to sand out. Unfortunately, the chemical stripping I paid so much for didn't get all this. Such a waste of $$.