Good Info so far. I'm almost at the same stage ... subscribing...
For me, I know my car will need floors, doors and quarters, and likely a roof skin ... plus whatever else I uncover...
How do the subframe bushings affect bodywork, should I start with fresh subframe bushings before I replace the sheet metal??
I was thinking that floor pans and DSE subframe connectors would be my starting point ....
__________________
1969 Camaro
Kore3 Z06 brakes
Hydratech hydroboost
Wilwood master
Ridetech stage 2 with truturn
Forgeline GA3 18x9.5/18x12.0
BFGoodrich Rivals 275/35 & 335/30
Magnum T56
Lots of AMD sheet metal
Sprinkled with DSE parts
Ididit Steering column
GM 376/525hp crate
Moser 12 bolt, tru-trac, 3.73:1
Speedhut Guages
Vintage Air
Corbeau LG1’s
Digi-tails
Ringbrothers
Harwood cowl
Last edited by 69Camaro; 06-11-2010 at 10:13 AM.
|