I finally got to install this humongus tank, had to cut a huge hole in the inner fender well. I did it with a dremel and composite blades, believe it or not, three blades did the job. Easy to cut curves with out having to take out the monster air tools. here's a few pics.
Ive been trying to find out which port on the ls7 oil pan is the supply(front or rear) and which one is the return. If any of you guys know please let me in on it, I must have searched four different sites and couldn't find anythng. I beilieve the top port on the resivoir is the catch can the next one down is the oil return and the bottom goes to the supply. Just need to know what each one is at the pan.
Thanks Rich