It does not do it at idle, only in gear at low speed when getting on the gas. It goes away as soon as I back off the throttle. I have about 1/2" up and down in the belts. I know what you are saying about the bearings. I don't want to put too mush lateral stress on the pulleys.
I thought it may be a starter contact issue with the new mini starter I installed, but after pulling the shield, I can't see any contact on the starter cone or the flexplate.
__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10
Last edited by g356gear; 06-14-2010 at 07:06 AM.
|