Quote:
Originally Posted by DriverzInc
Based on the measurements the original poster came up with, I'd agree that a 9" with a 6.25" should work as well. Have you measured the distance from your rotor hat to the outer fender? What do you come up with?
|
Ok, I put the whole thing together, swapped out the subframes and measured this. It is 5-5/16" from the hat to the unrolled fender lip.
Base on this measuremeant, to make the 18X9 with a 275 the same distance to the fender lip as the factory ralley with a 235, the BS needs to be 5.75". I am considering going 6.0" to give me a quarter inch more clearance because I am going to be pretty low.
Does this sound right?
