I had to shim the driver side hinge over to get gaps equal on each side. The reason why I replaced the stock hinges was a bad driver side hinge that wouldn't suck down properly. You had to push down on the back corner to get the hood down once the hood was latched. I am thinking that maybe with the sloppy hinge the sheet metal was installed to compensate. Now with good hinges its making things look a little off.
__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10
|