ok here is a short vid of the dyno pull ...made 502 ft lbs of torque at 3500 and only 380 hp untill it blew all the oil out the rear main seal and front l/h side of the pan gasket the hp curve was flat and increasing till this happened...should make in excess of 560hp when fixed ..it was producing 92 psi of oil pressure..its a new ford racing pump guess ill put a softer spring in the pump if i can..also you can here it breaking up... well thats the brand new MSD dizzy we found a almost broken wire inside... quality product control...but aleast it runs...
https://www.youtube.com/watch?v=ku_KWD_XiBE