Rolled it outside today to get a good look at it, while I work on plans and 3D models.
Don't mind the rust. The rear control arms will be replaced with Alston G-body ProPower Arms. The rust on the frame is from the so-called friend who put it outside. The body and bed are just a cheapo fiberglass parts that give me something to work off. The plan is to pull molds and lay-up the real parts as carbon fiber, Kevlar, and foam composites.
Next, I plan to narrow the bed a little, put some wedge in the body, get the track nose cut and installed, and start building the roof buck. I want to see the whole vehicle mocked up, plus I need all that in place to do the cage.